EasyManuals Logo

HIKVISION HWN-2100H Series User Manual

HIKVISION HWN-2100H Series
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
Network Video Recorder User Manual
58
The PoE is enabled with the short network cable mode (OFF) by default.
The bandwidth of IP camera connected to the PoE via long network cable (100 - 300
meters) cannot exceed 6 MP.
The allowed max. long network cable may be less than 300 meters depending on different
IP camera models and cable materials.
When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or
CAT6 network cable to connect with the PoE interface.
When the transmission distance reaches 250 to 300 meters, you must use the CAT6
network cable to connect with the PoE interface.
Refer to the Appendix 错误!未找到引用源。错误!未找到引用源。 for the list of IP
cameras.
You can check the connecting status and power information of POE channel on the interface.
Click Back to finish the settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION HWN-2100H Series and is the answer not in the manual?

HIKVISION HWN-2100H Series Specifications

General IconGeneral
BrandHIKVISION
ModelHWN-2100H Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals