Network Video Recorder User Manual
28
Adding and Connecting the IP Cameras
Activating the IP Camera
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Select Add IP Camera from the right-click menu in live view mode or Go to Menu>
Camera> Camera to enter the IP camera management interface.
For the IP camera detected online in the same network segment, the Password
status shows whether it is active or inactive.
IP Camera Management Interface
Click the inactive icon of the camera to enter the following interface to activate it.
You can also select multiple cameras from the list and click One-touch Activate to
activate the cameras in batch.
Activate the Camera
Set the password of the camera to activate it.
Use Admin Password: when you check the checkbox, the camera (s) will be
configured with the same admin password of the operating NVR.
To Next Page
Loading...
