Network Video Recorder User Manual
27
1) Click Add All.
The device starts to automatically search and add the matched cameras.
2) Click OK when the cameras are added.
Manually Add Cameras
1) Click Search to search the online IP cameras within the same network.
2) Click Add to add the cameras which have the same user name and
password with the device.
IP Camera Management
Before adding the camera, make sure the IP camera to be added is in active
status. If the camera is in inactive status, you can click the inactive icon of the camera to
set the password to activate it. You can also select multiple cameras from the list and
click the One-touch Activate to activate the cameras in batch.
Click Exit to complete the startup Setup Wizard.
To Next Page
Loading...
