Network Video Recorder User Manual
97
Select Trigger Channel tab and select one or more channels which will start to
record or become full-screen monitoring when an external alarm is input, and
click Apply to save the settings.
Select Arming Schedule to set the arming schedule of handling actions.
Set Arming Schedule of Alarm Input
Choose one day of a week and Max. eight time periods can be set within each
day, and click Apply to save the settings.
Time periods shall not be repeated or overlapped.
Repeat the above steps to set up arming schedule of other days of a week. You can
also use Copy button to copy an arming schedule to other days.
Select Linkage Action to set up alarm response actions of the alarm input (please
refer to Chapter 8.8 Setting Alarm Response Actions).
If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click OK to complete the settings of the alarm
input.
Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But
presets, patrols and patterns are exclusive.
To Next Page
Loading...
