Network Video Recorder User Manual
30
Adding IP Camera Interface
The online cameras with same network segment will be detected and displayed in
the camera list.
Select the IP camera from the list and click the button to add the camera. Or
you can click One-touch Adding to add all cameras (with the same login
password) from the list.
Make sure the camera to add has already been activated.
(For the encoders with multiple channels only) check the Channel Port checkbox in
the pop-up window, as shown in the following figure, and click OK to add multiple
channels.
Selecting Multiple Channels
OPTION 2:
On the IP Camera Management interface, click Custom Adding to pop up the Add
IP Camera (Custom) interface.
To Next Page
Loading...
