Network Video Recorder User Manual
42
Go to Menu > Configuration > Live View.
Live View-General
The settings available in this menu include:
Video Output Interface: Designates the output to configure the settings for, and
only VGA/ HDMI
TM
is selectable by default.
Live View Mode: Designates the display mode to be used for Live View.
Dwell Time: The time in seconds to dwell between switching of channels when
enabling auto-switch in Live View.
Enable Audio Output: Enables/disables audio output for the selected video
output.
Volume: Adjust the volume of live view, playback and two-way audio for the
selected output interface.
Event Output: Designates the output to show event video.
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event
screen.
Setting Cameras Order
Live View- Camera Order
To Next Page
Loading...
