Network Video Recorder User Manual
46
Adding and Connecting the IP Cameras
Activating the IP Camera
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Select the Add IP Camera option from the right-click menu in live view mode or click Menu>
Camera> Camera to enter the IP camera management interface.
For the IP camera detected online in the same network segment, the Password status shows
whether it is active or inactive.
IP Camera Management Interface
Click the inactive icon of the camera to enter the following interface to activate it. You can
also select multiple cameras from the list and click the One-touch Activate to activate the
cameras in batch.
Activate the Camera
Set the password of the camera to activate it.
To Next Page
Loading...
Need help?
General
