Network Video Recorder User Manual
68
Go to Menu > HDD.
HDD General
Select the HDD and click to enter the Local HDD Settings interface.
7) Set the HDD property to Redundancy.
HDD General-Editing
Click Apply to save the settings.
Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you
set the HDD property to Redundant. There should be at least another HDD which is
in Read/Write status.
Go to Menu > Record > Parameters.
1) Select Record tab.
2) Click More Settings to enter the following interface.
To Next Page
Loading...
