Network Video Recorder User Manual
72
HDD General- Editing
Set the HDD property to Read-only.
Click OK to save settings and back to the upper level menu.
You cannot save any files in a Read-only HDD. If you want to save files in the
HDD, change the property to R/W.
If there is only one HDD and is set to Read-only, the NVR can’t record any
files. Only live view mode is available.
If you set the HDD to Read-only when the NVR is saving files in it, then the file
will be saved in next R/W HDD. If there is only one HDD, the recording will be
stopped.
To Next Page
Loading...
