HIKVISION iDS-7200AHQHI-M Series - Page 48

Figure 4-3 Panel Mode
2. Check Enable.
3. Select an analog camera.
4. Select Panel Mode.
5. Set Scene
Descripon.
Mounng Locaon
The camera mounng locaon.
Mounng Type
The camera mounng type.
Standing Region Contained in Scene
Whether the scene contains the human standing region.
6. Set Smart ATM Capture parameters for captured image.
7. Set Target Overlay. Target frames or rules can be overlaid on captured image.
8. Set Rule
Conguraon.
1) Check Enable of the selected rule.
2) Double click the rule, or click
.
3) Set Name, Type, Alarm
Duraon, etc.
Duraon
ATM Digital Video Recorder User Manual
33