HIKVISION iDS-7200AHQHI-M Series User Manual

Figure 4-4 Human Face Mode
2. Check Enable.
3. Select an analog camera.
4. Select Human Face Mode.
5. Set Smart ATM Capture parameters for captured image.
6. Set Rule
Conguraon.
1) Check Enable of the selected rule.
2) Double click the rule, or click
.
3) Set Name, Type, Alarm Duraon.
4) Click OK.
7. Draw the human face
detecon region. It is recommended to click Full Screen to the draw
detecon region as full-screen.
8.
Oponal: Click Draw Max. Size/Draw Min. Size to draw the maximum/minimum ltering size of
the human face.
Note
• It is recommended to use 0 for size
ltering, which the device will automacally calculate and
set the ltering size.
• The max. face size should be larger than the min. face size.
9. Oponal: Set the shield region. The shield region is used to shield environment interferences or
other inuences which may cause false alarms.
ATM Digital Video Recorder User Manual
35

HIKVISION iDS-7200AHQHI-M Series Specifications

General

Brand	HIKVISION
Model	iDS-7200AHQHI-M Series
Category	DVR
Language	English