UM IPC-4300H 040320NA 146
name and password, and click Log In. After logging in
successfully, the camera can be tested.
• Play: Select mainstream or substream to play the IP camera’s live
video.
• Modify Network Information: Modify the camera’s user name and
password (i.e. the ONVIF, Dahua Test Tool, or IP Camera Tester user
name and password, not the web user name and password).
Figure 149, User Name and Password Modification Screen
• Factory Reset: The camera will undergo a soft reset and the
device’s user name, password and network settings will be saved.
Other information will be factory reset.
To Next Page
Loading...