UM IPC-4300H 040320NA 93
AHD cameras have different settings. The PTZ setting does not
allow for the camera to be controlled. PTZ-2 must be selected in
this case.
Figure 88, Coaxial Selection Menu
For Coaxial PTZ Control of an AHD camera, no parameter settings
are required.
For further operation instructions, please refer to Section 2.3.13:
CVI Camera Test.
2.3.16. Network Tool
• IP Address Scan
Connect the cable to the LAN port and click to begin. Set the IP
address search range by changing the Start and End IP addresses.
Click the Start button to scan the IP address range. An IP address can
also be entered in the Port Number Scan field to scan for open ports.
To Next Page
Loading...