HIKVISION IPC-4300H - In the event that the IP Tester does not automatically detect the RTSP stream, refer to the specific camera manufacturer for the specific RTSP stream URL. This information can be found online by searching for a camera’s model number and RTSP.; 2.3.33. Hik Test Tool

UM IPC-4300H 040320NA 140
Figure 139, RTSP Player Screen – Stream Selection Menu
In the event that the IP Tester does not automatically
detect the RTSP stream, refer to the specific camera
manufacturer for the specific RTSP stream URL. This
information can be found online by searching for a
camera’s model number and RTSP.
2.3.33. Hik Test Tool
The Hik Test Tool application is design to activate and debug
Hikvision cameras. It can auto-identify unactivated Hikvision
cameras and display images from them.
Tap to enter.
• Hikvision Activation: When connecting an unactivated Hikvision
camera to the Tester, the camera will be auto-identified and
display “Unactivate” in safety mode. Select Enable and click OK in
the “The camera is not activated, activate now?” pop-up.