Hill-Rom Isolette C2000 - Page 60

2.1 Diagnostic Menus
Chapter 2: Troubleshooting Procedures
Table 2-9. System Configuration Factory Default Settings
Feature Setting
Temperature control mode Air mode
Air set temperature 95.0°F (35.0°C)
Skin set temperature 97.7°F (36.5°C)
Humidity control mode OFF
Humidity set value 50% RH
Oxygen control mode OFF
Oxygen calibration level 21%
Temperature units °C
Weight units kg
Trend Air, 2 hours
Language English
Altitude < 10000' (304800 cm)
b. To call up the Diagnostic Information menu, press the Diagnostic
Information key. Go to “Diagnostic Information Menu” on page 2-27.
c. Enter the desired system configuration settings and return to Main
Display 1, press the Silence/Reset key.
Page 2-26 Isolette® Infant Incubator Service Manual (man223rf)