HIMA HIMatrix F30 03 - 3.2 Equipment and Scope of Delivery; 3.3 Type Label

3 Product Description F30 03
Page 14 of 46 HI 800 473 E Rev. 1.00
3.2 Equipment and Scope of Delivery
The available components and their part numbers are listed below:
Designation Description Part no.
F30 03
SILworX
Compact controller with 20 digital inputs and 8
digital outputs.
Operating temperature 0...+60 °C, for SILworX
programming tool
98 2200496
Table 3: Part Numbers
3.2.1 IP Address and System ID (SRS)
A transparent label is delivered with the device to allow one to note the IP addresses of the
CPU and COM and the system ID (SRS for system rack slot) after a change.
Default value for IP address of the CPU: 192.168.0.99
Default value for IP address of the COM: 192.168.0.100
Default value for SRS: 60000.0.0
The label must be affixed such that the ventilation slots in the housing are not obstructed.
Refer to the SILworX First Steps manual for more information on how to modify the IP
address and the system ID.
3.3 Type Label
The type plate contains the following details:
 Product name
 Bar code (1D or 2D code)
 Part no.
 Production year
 Hardware revision index (HW Rev.)
 Firmware revision index (FW Rev.)
 Operating voltage
 Mark of conformity
Figure 4: Sample Type Label