HIMA HIQuad X User Manual

System Appendix
HI 803 211 E Rev. 1.01.00 Page 105 of 110
Appendix
Glossary
Term
Description
AI
Analog input
AO
Analog output
ARP
Address resolution protocol, network protocol for assigning the network addresses to
hardware addresses
Backplane PCB
Backplane PCB
COM
Communication module
CRC
Cyclic redundancy check
DI
Digital input
DO
Digital output
EMC
Electromagnetic compatibility
EN
European standard
ESD
Electrostatic discharge
FB
Fieldbus
FBD
Function block diagrams
ICMP
Internet control message protocol, network protocol for status or error messages
IEC
International electrotechnical commission
Interference-free
In this context, interference-free refers to safety-related and non-safety-related
modules, which may be operated within a rack, if they are marked as interference-free.
In terms of functional safety, the non-safety-related-module has no influence on the
safety-related modules
MAC Address
Media access control address, hardware address of one network connection
PADT
Programming and debugging tool (in accordance with IEC 61131-3), PC with SILworX
PELV
Protective extra low voltage
PES
Programmable electronic system
R
Read: The system variable or signal provides a value, e.g., to the user program
R/W
Read/Write (column title for system variable/signal type)
Rack-ID
Rack identification (number)
rPP
Peak-to-peak value of a total AC component
SELV
Safety extra low voltage
SFF
Safe failure fraction, portion of faults that can be safely controlled
SIL
Safety integrity level (in accordance with IEC 61508)
SILworX
Programming tool for HIMA systems
SNTP
Simple network time protocol (RFC 1769)
SRS
System.Rack.Slot addressing of a module
SW
Software
TMO
Timeout
tWDT
Watchdog time
W
Write, the system variable or signal receives a value, e.g., from the user program
WD
Watchdog, device for monitoring the system's correct operation Signal for fault-free
process

HIMA HIQuad X Specifications

General

Brand	HIMA
Model	HIQuad X
Category	Power distribution unit
Language	English