System Product Description
HI 803 211 E Rev. 1.01.00 Page 41 of 110
4.3.1 Mono H51X Base Rack (24 VDC)
The 24 V mono power supply is performed for the H51X base rack and the I/O processing
modules by connecting to one or redundant power supply units, see Figure 19.
Connection to one or redundant power supply units, see Figure 19
Connection to 24 VDC for the I/O processing modules from the same source as the H51X base rack
Redundant supply of the F 7133 power distribution modules, insert jumpers in accordance with the
application
Reference potential L-
Figure 21: Mono Connection to H51X Base Rack (24 VDC)
For redundant power supply, HIMA recommends using the K 7212 power distribution
module with decoupling diodes.
To Next Page
Loading...