System Product Description
HI 803 211 E Rev. 1.01.00 Page 45 of 110
4.3.5 Mono H41X Base Rack (24 VDC)
The 24 V mono power supply is performed for the H41X base rack and the I/O processing
modules by connecting to one or redundant power supply units, see Figure 19.
Inline terminals XG5.1…XG5.13 to 24 V power supply, XG5.13 for connecting to the I/O processing
modules.
Connection to one or redundant power supply units, see Figure 19
Connection to 24 VDC for the I/O processing module from the same source as the H41X base rack
Redundant supply of the F 7133 power distribution modules, insert jumpers in accordance with the
application
Reference potential L-
Figure 25: Mono Connection to H41X Base Rack
To Next Page
Loading...