HIMA HIQuad X - Figure 5: Example of H51 X Redundancy System

System Concept for HIQuad X
HI 803 211 E Rev. 1.01.00 Page 19 of 110
System bus interfaces on the rear side of the base rack
Figure 5: Example of H51X Redundancy System
The rack IDs do not necessarily have to be arranged as described above, but they must be
unique.
To ensure a clearer overview, HIMA recommends the following:
 Arrange the rack IDs in accordance with Figure 5.
 Between the base rack and the first F-IOP module, use red patch cables for system bus A.
 Between the base rack and the first F-IOP module, use green patch cables for system bus B.