HIMA HIQuad X - The Minimum Configuration Version Parameter

Programming System
Page 76 of 110 HI 803 211 E Rev. 1.01.00
6.1.3.5 The Minimum Configuration Version Parameter
 The highest Minimum Configuration Version is always selected for new projects. Verify that
this setting is in accordance with the operating system version in use.
 In a previous project converted to the current SILworX version, the value for Minimum
Configuration Version remains the value set in the previous version. This ensures that the
configuration CRC resulting from the code generation is the same as in the previous version
and the configuration is still compatible with the operating systems of the modules.
The value of Minimum Code Generation only needs to be increased for converted projects if
additional functions of a controller should be used.
 If features requiring a higher configuration version are used in the project, SILworX
automatically generates a configuration version higher than the preset Minimum
Configuration Version. This is indicated by SILworX in the code generation logbook. The
modules reject loading configurations if their version and operating system do not match.
The safety-related SILworX version comparison can be used to determine and prove
changes performed to the current project version compared to a previous one.
 For HIQuad X, Minimum Configuration Version must be set to SILworX V10 or higher.