HIMA HIQuad X User Manual

Programming System
Page 88 of 110 HI 803 211 E Rev. 1.01.00
6.4.4 Setting up PES User Accounts
A PADT user account with Security Administrator access mode has access to all the PES user
groups.
Take the following points into account when setting up PES user groups:
 Make sure that at least one PES user account with Administrator access mode is configured
in every PES. Usually, this is the Security Administrator user group. Always define a
password for the PES user account with Administrator access mode.
i
Generally, passwords are to be used. Suitable passwords are composed of more than 10
characters and contain numbers, special characters, capital and lowercase letters. For more
information, refer to the HIMA automation security manual (HI 801 373 E).
 In SILworX, use Verification to check the created PES user groups.
 The new PES user groups are valid once the code has been generated and a download has
been performed to load the project into the controller. All PES user groups previously saved,
e.g., the default settings, are no longer valid.

HIMA HIQuad X Specifications

General

Brand	HIMA
Model	HIQuad X
Category	Power distribution unit
Language	English