System Table of Contents
HI 803 211 E Rev. 1.01.00 Page 3 of 110
Table of Contents
1 Introduction 7
1.1 Structure and Use of the Document 7
1.2 Target Audience 7
1.3 Writing Conventions 8
1.3.1 Safety Notices 8
1.3.2 Operating Tips 9
1.4 Safety Lifecycle Services 10
2 Safety 11
2.1 Intended Use 11
2.1.1 Application in Accordance with the De-Energize to Trip Principle 11
2.1.2 Application in Accordance with the Energize to Trip Principle 11
2.1.3 Use in Fire Alarm Systems 11
2.1.4 Explosion Protection 11
2.2 ESD Protective Measures 12
2.3 Residual Risk 12
2.4 Safety Precautions 12
2.5 Emergency Information 12
3 Concept for HIQuad X 13
3.1 Safety and Availability 13
3.2 Concept for HIQuad H51X 14
3.2.1 The H51X Mono System 15
3.2.2 The H51X Redundancy System 17
3.3 Concept for HIQuad H41X 20
3.3.1 The H41X Mono System 21
3.3.2 The H41X Redundancy System 23
3.4 Extension Rack 25
3.5 Ventilation Concept 26
3.5.1 Measures for Reducing the Temperature 26
3.5.2 Engineering Support 26
3.5.2.1 Installing the HIQuad X System in the Control Cabinet 26
3.5.2.2 Heat Dissipation 28
3.5.2.3 Installation Type 28
3.5.2.4 Natural Convection 28
3.5.2.5 Note on the Standard 28
4 Product Description 29
4.1 Backplane 29
4.2 19-Inch Frame 29
4.2.1 H51X Backplane 31
4.2.1.1 Supply of the H51X Base Rack 31
4.2.1.2 Buffered Voltage for LS1+ and LS2+ in F-PWR 02 Buffer Modules 32
4.2.1.3 5 V Power Supply for Extension Racks 32
4.2.1.4 Signaling Relay for F-PWR 02 Buffer Module, XG6 32
4.2.2 H41X Backplane 33
4.2.2.1 Supply of the H41X Base Rack 33
To Next Page
Loading...