4
―――――――――――――――――――――――――――
Chapter 2 Names and Functions of Parts
――――――――――――――――――――――――
2.1 Push Buttons
The operation of push-button is shown as below.
When push the button, a display symbol will light,
and the beeper will sound. Turning the rotary switch
to another switch setting resets all push buttons to
their default state.
SHIFT
button
For voltage and current measurements, press this
button momentarily to cycle through DC and AC
tests.
For Ohm test, press button momentarily to toggle
"Audible continuity mode" ON/OFF. Pushing this
button for more than 1 second will exit the
continuity function and returns to the auto-
ranging ohm measurement.
To Next Page
Loading...
