Hioki 3803 - Chapter 6 Maintenance and Service; 6.1 Changing the Battery and Fuses

37
―――――――――――――――――――――――――――
Chapter 6 Maintenance and Service
――――――――――――――――――――――――
WARNING
To avoid electric shock when replacing the
battery and fuse, first disconnect the test leads
from the object to be measured, then open the
cover.
A fter replacing the battery or fuse, replace the
cover and screws before using the product.
When replacing the battery, Be sure to insert
them with the correct polarity . Other wise, poor
performance or damage from battery leakage
could result. Replace batter y only with the
specified type.
To avoid the possibility of explosion, do not shor t
circuit, disassemble or incinerate battery .
Handle and dispose of battery in accordance with
local regulations.
Replace the fuse only with one of the specified
characteristics and voltage and current ratings.
Using a non-specified fuse or shorting the fuse
holder may cause a life-threatening hazard.
Chapter 6
Maintenance and
Service
6.1 Changing the Battery and Fuses