25
―――――――――――――――――――――――――――
Chapter 4 Special Functions Instructions
――――――――――――――――――――――――
NOTE
4.2 Auto Power Save
The instrument will auto power save within 30
minutes, if the functions are not changed. When
power-off happens, the finial data is saved. You can
push any buttons to wake-up meter, the display will
indicate the finial data and the data hold has been
enabled.
DISABLE AUTO POWER SAVE
When the meter is to be used for long periods of
time, the operator might want to disable the auto
power save. Once the auto power save function is
disabled, the meter will stay on continuously. The
meter will shut off by turning the rotary switch to
the off position.
Press and hold
SHIFT
or
RANGE
or
RS232
button,
then turn on rotary switch to any positions, until the
buzzer sounds a tone to release pushing buttons. The
annunicator of APS will turn off.
If you turn the rotary switch to other positions to
wake-up meter, the finial data will not keep.
To Next Page
Loading...
