12
―――――――――――――――――――――――――――
Chapter 3 Measurement Procedures
――――――――――――――――――――――――
DANGER
The maximum input voltage is 1000 V DC, 1000
V rms or 10
6
V Hz. Attempting to measure
voltage in excess of the maximum input could
destroy the product and result in personal
injury or death.
To avoid electrical shock, be careful to avoid
shorting li ve lines with the test leads.
For safety, test lead connections must always
be made at the secondary side of a circuit
breaker.
3.2 Voltage Measurement
To Next Page
Loading...
