Hioki 3803 - 2.2 Rotary Switch

6
―――――――――――――――――――――――――――
Chapter 2 Names and Functions of Parts
――――――――――――――――――――――――
Power off position.
AC voltage measurements.
AC or DC voltage measurements. Initial test
is defined to AC.
Ohm and Continuity measurements
Diode Check
AC or DC Current measurements
AC or DC Current measurements.
A
AC or DC Current measurements.
2.2 Rotary Switch
To select function, turn the rotary switch to a switch
setting. Then the meter is ready for use. (If you
press and hold any push button while pushing the
meter from OFF to ON, the display will remain lit
until the push button is released.)