Hioki PW3336 - Page 134

4.2 LAN Settings and Connection (Before Using Command Communications)
128
Making 1:1 Connections Between the Instrument and a PC
This completes the process of connecting the instrument and PC.
1 Connect the 9642 LAN Cable to the supplied
crossover adapter.
2 Connect the crossover adapter to the 100BASE-
TX connector on the instrument.
3 Connect the 9642 LAN Cable to the 100BASE-TX
connector on the PC.
3
2
Model 9642 LAN Cable
1
Connection cable: Use one of the following.
• 100BASE-TX crossover cable (maximum length 100 m)
• 100BASE-TX straight-through cable with crossover adapter
(maximum length 100 m)
• 9642 LAN cable (option, supplied with crossover adapter)
Connecting with the 9642 LAN Cable
and crossover adapter (supplied)
100BASE-TX connector on instrument
Crossover adapter
Connect to PC
Instrument PC
100BASE-TX
cross cable
You can monitor and control the instrument from a PC
by connecting the instrument to the PC with LAN cable
(100BASE-TX cable)