128
Saving Measured Data
Folder and le structure when saving data automatically
The following explanation assumes that a folder named [AAA] has been created as the destination
location so that data can automatically be saved on November 4.
Example 1
110401000.csv 110401001.csv
110400000.csv 110400001.csv 110400999.csv
PW8001 AAA
A new le will be created if data size
exceeds approx. 500 MB per le.
Stop integration and press the DATA RESET key.
A new le will be created upon the next integration.
An error will be
displayed when the
101st le is created
Example 2
110400000.csv 110401000.csv
110400000.csv 110401000.csv 110499000.csv
PW8001 AAA
BBB
When integration is stopped and the DATA RESET key is
pressed, a new le will be created upon the next integration.
Specify a new folder in [Destination].
An error will be
displayed when the
101st le is created
To Next Page
Loading...
