165
Acquiring Data through the FTP Server
Accessing the instrument’s FTP server
This example explains how to access the FTP server using File Explorer in Windows 10.
Launch File Explorer on the computer and enter the instrument’s address into the address bar.
When [HTTP/FTP server Authentication] is set to [ON], enter the username and password to log
in.
Set the username and password to prevent third parties from deleting les by accident.
See “FTP server connection restriction (FTP authentication)” (p. 167).
[ftp://Username:Password@Instrument’s IP address]
For the username HIOKI and the password PW8001
Enter ftp://HIOKI:PW8001@192.168.0.2.
If the instrument’s address is 192.168.0.2
The USB ash drive connected to the instrument
If connection is disabled
Check the instrument’s communications settings.
See “9.1 Connecting and Setting the LAN Interface” (p. 158).
Connecting with computers
To Next Page
Loading...
Need help?
General
