Hioki PW8001-11 User Manual

150
Waveform/Analog Output (Waveform and D/A Output Option)
Selected output parameter Notation
Output
voltage
polarity
Rated output voltage
E󰀩ciency η 0 V to +5 V DC for a value of 0% to 200%
Loss value Loss

Pin = Pin1 + Pin2 + Pin3 + Pin4 + Pin5 + Pin6
Pout = Pout1 + Pout2 + Pout3 + Pout4 + Pout5 + Pout6
The larger of Pin and Pout is used as the P range.
±
5 V DC for a value of
±
100% of the P range
Example: With the 3 kW P range,
±
5 V DC for a value of
±
100
% of 3 kW
Torque Tq

Analog DC input:
(Voltage range)
×
(Scale value) = (Rated torque)
±
5 V DC for a value of
±
100% of the rated torque
Frequency input: (Scale value) = (Rated torque)
±
5 V DC for a value of
±
100% of the rated torque
RPM Spd

Analog DC input:
(Voltage range)
×
(Scale value) = (Rated RPM)
Pulse input:
[60
×
(Upper frequency limit)] / (Pulse count setting)
= (Rated RPM)
±
5 V DC for a value of
±
100% of the rated RPM
Motor power Pm

±
5 V DC for a value of
±
100% of the Pm range*
2
Slip Slip

±
5 V DC for a value of
±
100%
Free input during
independent input mode
operation
CH*

*
1
Analog DC input:
±
5 V DC for a value of
±
100% of the voltage
range
Pulse input:
±
5 V DC for a value of
±
100% of the upper
frequency limit
User-dened calculation UDF

±
5 V DC for a value of
±
100% of the maximum value set for
each user-dened calculation
*1: Analog DC input has polarity, but pulse frequency input does not.
*2: The PM range is calculated by substituting the rated torque and rated RPM respectively for the torque and RPM of
the motor power equation.
HIOKI PW8001A961-00

Hioki PW8001-11 Specifications

General

Brand	Hioki
Model	PW8001-11
Category	Measuring Instruments
Language	English