Synchronizing the System Time in the
Network
102
7.2
SNTP
Basic Configuration
Release
6.0
07/2010
7.2.3 Configuring SNTP
Select the Time:SNTP dialog.
X Operation
In this frame you switch the SNTP function on/off globally.
X SNTP Status
The “Status message” displays statuses of the SNTP client as
one or more test messages. Possible messages:
Local system clock is synchronized; An SNTP loop
has occurred; General error; Synchronized one
time; Client deactivated; Server 1 is not
synchronized; Server 1 has incorrect protocol
version; Server 1 not responding; Server 2 is
not synchronized; Server 2 has incorrect
protocol version; Server 2 not responding.
To Next Page
Loading...
Need help?
General
