Hirschmann MACH 100 User Manual

Entering the IP Parameters
Basic Configuration
Release 6.0 07/2010
2.4 Loading the system configuration
from the ACA
39
2.4 Loading the system
configuration from the ACA
The AutoConfiguration Adapter (ACA) is a device for
X storing the configuration data of a device and
X storing the device software.
In the case of a device becoming inoperative, the ACA makes it possible to
easily transfer the configuration data by means of a substitute device of the
same type.
When you start the device, it checks for an ACA. If it finds an ACA with a valid
password and valid software, the device loads the configuration data from
the ACA.
The password is valid if
X the password in the device matches the password in the ACA or
X the preset password is entered in the device.
To save the configuration data on the ACA(see on page 59 “Saving locally
(and on the ACA)“).

Hirschmann MACH 100 Specifications

General

Brand	Hirschmann
Model	MACH 100
Category	Switch
Language	English