Network Load Control
128
8.2
Multicast Application
Basic Configuration
Release
6.0
07/2010
8.2.4 Setting IGMP Snooping
Operation
Settings for IGMP Querier and IGMP
With these frames you can enter global settings for the IGMP settings and
the IGMP Querier function.
Prerequisite: The IGMP Snooping function is activated globally.
Select the Switching:Multicast:IGMP dialog.
The “Operation” frame allows you to enable/disable IGMP Snooping
globally for the entire device.
If IGMP Snooping is disabled, then
X the device does not evaluate Query and Report packets received,
and
X it sends (floods) received data packets with a Multicast address as
the destination address to all ports.
To Next Page
Loading...
