Loading/saving settings
Basic Configuration
Release
6.0
07/2010
53
3 Loading/saving settings
The device saves settings such as the IP parameters and the port
configuration in the temporary memory. These settings are lost when you
switch off orreboot the device.
The device enables you to
X load settings from a non-volatile memory into the temporary memory
X save settings from the temporary memory in a non-volatile memory.
If you change the current configuration (for example, by switching a port off),
the Web-based interface changes the “load/save” symbol in the navigation
tree from a disk symbol to a yellow triangle. After saving the configuration,
the Web-based interface displays the “load/save” symbol as a disk again.
To Next Page
Loading...
Need help?
General
