EasyManuals Logo

Hirschmann MACH 100 User Manual

Hirschmann MACH 100
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
Network Load Control
Basic Configuration
Release
6.0
07/2010
8.1
Direct Packet Distribution
121
in the destination address field are sent to this port. The device enters
learned source addresses in its filter table (see on page 122 “Entering Static
Addresses“).
The device can learn up to 8.000 addresses. This is necessary if more than
one terminal device is connected to one or more ports. It is thus possible to
connect several independent subnetworks to the device.
8.1.3 Aging of Learned Addresses
The device monitors the age of the learned addresses. Address entries
which exceed a particular age - the aging time - are deleted by the device
from its address table.
Data packets with an unknown destination address are flooded by the
device.
Data packets with known destination addresses are selectively transmitted
by the device.
Note: A reboot deletes the learned address entries.
Select the Switching:Global dialog.
Enter the aging time for all dynamic entries in the range from 10 to
630 seconds (unit: 1 second; default setting: 30).
In connection with the router redundancy, select a time 30
seconds.

Table of Contents

Other manuals for Hirschmann MACH 100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann MACH 100 and is the answer not in the manual?

Hirschmann MACH 100 Specifications

General IconGeneral
BrandHirschmann
ModelMACH 100
CategorySwitch
LanguageEnglish

Related product manuals