Hirschmann MACH 100 User Manual

Operation Diagnosis
178
9.1 Sending Traps
Basic Configuration
Release 6.0 07/2010
9.1.2 SNMP Traps during Boot
The device sends the ColdStart trap every time it boots.
hmAddressRelearnDetectT
rap
is sent when Address Relearn Detection is activated and the
threshold for the MAC addresses relearned at different ports has
been exceeded. This process very probably indicates a loop
situation in the network.
hmDuplexMismatchTrap is sent if the device has detected a potential problem with the
duplex mode of a port.
Trap name Meaning
Table 22: Possible traps

Hirschmann MACH 100 Specifications

General

Brand	Hirschmann
Model	MACH 100
Category	Switch
Language	English