Setting up the Configuration
Environment
Basic Configuration
Release
6.0
07/2010
A.4
Preparing Access via SSH
235
A.4.3 Access via SSH
The program PuTTY enables you to access your device via SSH. This
program is located on the product CD.
Start the program by double-clicking on it.
Enter the IP address of your device.
Select “SSH”.
Click “Open” to set up the connection to your device.
Depending on the device and the time at which SSH was configured, it
can take up to a minute to set up the connection.
Shortly before the connection is set up, PuTTY displays a security alert
message and gives you the option of checking the fingerprint of the key.
copy tftp://10.0.10.1/
device/rsa1.key
nvram:sshkey-rsa1
The device loads the key file to its non-volatile
memory.
10.0.10.1 represents the IP address of the
tftp server.
device represents the directory on the
tftp server.
rsa1.key represents the file name of the key.
ip ssh Reactivate the SSH function after transfering the
key to the device.
To Next Page
Loading...
Need help?
General
