16
Installation MACH1000
Release
06
03/2021
1 Description
1.1 General device description
You can choose from a wide range of variants. You have the option to set up
your device individually based on different criteria:
Number of ports
Transmission speed
Types of connectors
Temperature range
Supply voltage range
Certifications
The device is designed for the special requirements of industrial automation.
The device meets the relevant industry standards, provides very high
operational reliability, even under extreme conditions, and also long-term
reliability and flexibility.
The device allows you to set up switched Industrial Ethernet networks
according to standard IEEE 802.3.
The device works without a fan.
If required, the devices are PoE-capable.
For devices without PoE, the voltage supply can be redundant if required.
The following installation options are available:
19" switch cabinet
Mounting on a flat surface
You have the option of choosing various media to connect to the end devices
and other network components:
Twisted pair cable
Multimode F/O
Singlemode F/O
The ring redundancy concept allows the network to be reconfigured quickly
after a failure.
Product configuration data can be provided by:
diagnosis displays
Display of the operating parameters
There are convenient options for managing the device. Manage your devices
via:
Web browser
Telnet
HiDiscovery (software for putting the device into operation)
To Next Page
Loading...
Need help?
General
