(Attached Figure4-2-22)
4.3.3 Speicification and operation guide of Wheel Hub and
Tyre.
Since wheels and tyres are crucial to the vehicle
operation, inspection for tyre pressure and profile
depth is necessary.
Specification of Wheel and Tyre
Wheel Hub Dimension
Tyre Dimension
（kPa/PSI）
Tyre Pressure
Front
Wheel
12×6.AT 25×8-12 70/10
Rear
Wheel
12×8AT 25×10-12 35/10
To ensure maximum security and longer life expectancy of
the wheel, please periodically inspect the tyre pressure
and profile depth. Insufficient tyre pressure can result
in not only intensified wearing of the tyre but also
instability during the course of operating the vehicle
(such as hard turning). Excessive tyre pressure can also
reduce the friction force between the tyre and ground,
causing spinning or lose of control. Therefore, please
ensure the tyre pressure strictly complies with figures
shown in the chart above.
To Next Page
Loading...
