nut
M10×1.25 10、
rocker cushion collar gasket
11、
hexagon self-lock nut
M10×1.25 12、cotter
pin 3.2×3213、
simple front shock absorber(left/right)parts
14、
hexagon self-lock
nut
M10×1.25 15、
hexagon flange surface bolt
M10×52 16、Rocker baffle 17、
hexagon flange surface
bolt
M618、
hexagon flange surface bolt
M6×12
4.6.3 Disassembly, Maintenace and Assembly the
supporting rocker parts
1、Disassembly and Maintenace
In the suspension,there is easy to appear the problem with
bushing, cotter pin and shock absorber.
A、If the left and right rocker rocks fiercely,chcke the few
aspect,wether the bushing of the rocker is crushed,the middle
rubber separate is aging and chapped.
B、checke whether the cotter pin is credible,if it is not instead
the same spec cotter pin.
C 、 The problem with the shock absorbe and maintain
method,whether it can returns to the position under the pressur
and the torsional spring is rupture.If it is rupture or nearly
to rupture,instead the shock absorbe.whether it leak oil,if so
instead the same spec shock absorbe.According to the different
request,if there is a oil cup on the rocker,must checke it
whether complete and refuels.
2、Assembly(See the figure)
1、Use 16pieces of Hexagon Flange BoltM10×70 and 16pieces of
To Next Page
Loading...
