bolt to connect the front upper left and right rocker,front
lower L/R rocker,rear upper L/R rocker and rear lower L/R rocker
with the frame.To ensure the fastening torque is 40-45Nm.
2、Connect the front shock absorbe,frame and rocker with 4pieces
of Hexagon Flange BoltsM10 × 52 and 4pieces of self-lock
nutsM10.
3 、 Connect the rear shock absorbe and rear lower rocker
combination with 2pieces of Hexagon Flange BoltsM10×65 and
2pieces of self-lock nutsM10.
4、
Connect the rear shock absorbe and frame with 2pieces of Hexagon
Flange BoltsM10×70 and 2pieces of self-lock nutsM10.
Attention:
A、Put on the butter to each part when it is assemble.
B 、 Do not scratches the surface of the spare part
surface.
To Next Page
Loading...
