Message Content LP could not import Time Setting of SVP.
Explanation Import of time from the management module failed.
LPAR manager
operation
Aborts the specified process.
What to do Check if the version of management module consist with a
cooperation NTP version.
Message Content
LP IPv4 address is needed for specified connection method
of the virtual COM.
Explanation To use the connection method of the specified virtual COM
console, set a LP IPv4 address.
LPAR manager
operation
Aborts the specified process.
What to do Set a LP IPv4 address and try the operation again.
Message Content LP is busy with another LPAR(X) activation process.
Explanation During LPAR Activation processing, activation failed except for the
securing of resources.
LPAR manager
operation
Aborts the specified process.
What to do Wait a moment and then retry the specified process.
Message Content
LP is executing LPAR migration, Please try again after it is
finished.
Explanation Operation is not allowed due to the LPAR migration in progress.
LPAR manager
operation
Aborts the specified process.
What to do Retry the specified process after the LPAR migration is completed.
Message Content
LP is executing LPAR migration, LP System Shutdown was
canceled.
Explanation Aborts the LPAR manager Shutdown due to the LPAR migration in
progress.
LPAR manager
operation
Aborts the LPAR manager Shut down.
What to do Retry the specified process after the LPAR migration is completed.
Message Content LP is not executable condition for this request. Please wait.
Explanation The LPAR manager system is not in the condition to execute the
requested processing.
9-14
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
