Message Content Memory allocation failed (Fragmentation).
What to do The memory could not be secured due to fragmentation. Reduce
the memory allocation or try again to activate the LPAR after you
have deactivated a currently active LPAR.
Message Content Memory allocation failed (Insufficient).
Explanation When you activated an LPAR, the memory capacity you specified
could not be secured.
LPAR manager
operation
Aborts LPAR activation.
What to do Reduce the memory allocation or try again to activate the LPAR
after you have deactivated a currently active LPAR.
When memory node is specified, execute either of following
procedure.
- Reduce the amount of the memory allocated to LPAR so that it
may become within the amount of the free memory in the node.
- Activate the LPAR required after deactivating the LPAR which is
using the memory in the Node.
Message Content Memory size is zero.
Explanation Because the memory size is zero, the LPAR cannot be activated.
LPAR manager
operation
Aborts LPAR activation.
What to do Set a memory size and active the LPAR.
Message Content No groups can be removed.
Explanation No group can be deleted.
LPAR manager
operation
Aborts the specified process.
What to do Review the specified process.
Message Content Not Changed!! Select Device is Management Path.
Explanation When you tried to change the NIC schedule mode, it was not
changed because the selected NIC was specified as the
management path.
LPAR manager
operation
Aborts the specified process.
What to do Reconsider the specified processing.
Message Content NTP server is not set.
Explanation There is no NTP server setting.
Messages
9-19
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
