Hitachi Content Platform S Series - Page 142

putting covers back on server modules
putting covers back on server modules 113
PuTTY
about 3, 6
installation file 4
installing 7
using with Ethernet connection 14
using with serial connection 8
using with SSH connection 10
R
rail extenders
attaching to rails (S10 Nodes) 52
attaching to rails (S30 Nodes) 124
Rawrite32
about 3, 17
installation file 4
installing 16
preparing USB flash drives for S Series Node
refurbishment 18
rebooting server modules, S30 Nodes 79
reconfiguring laptop computers for SSH access
to server modules 12
refurbishing S Series Nodes, about 1
refurbishing S10 Nodes
attach extenders to rails 52
check for hardware issues 30
connect PDUs to power sources 30
connect power cables 29
connect server interconnect cable 29
disconnect power cables 41
disconnect server interconnect cable 42
insert inner enclosure rails into outer
rails 54
insert upgrade-kit drives 26
pack enclosure 55
prepare enclosure carton 40
remove cable management arms 47
remove enclosure from rack 49
remove front panel and light pipe
assembly 46
remove outer enclosure rails from rack 50-
51
remove upgrade-kit drives 42
requirements 23
reset BIOS on server modules 32
shut down 40
unpack enclosure 24
unrack and pack PDUs 55
wipe drives 33
refurbishing S30 Nodes
attach extenders to rails 124
cable enclosures 69
check for hardware issues 74
connect enclosure power cables 73
connect PDUs to power sources 74
connect server interconnect cable 69
connect server module power cables 73
detach four-port Ethernet PCI card 93
detach SAS PCI cards 95
detach two-port Ethernet SFP+ PCI
card 91
disconnect BMC interconnect cables 82
disconnect enclosure power cables 80
disconnect server interconnect cable 82
disconnect server module power cables 80
insert inner enclosure rails into outer
rails 126
insert inner server module rails into outer
rails 87
insert upgrade-kit drives 64
pack enclosure 127
pack server module 113
position enclosures 62
prepare enclosure carton 115
put server module cover on 113
reinsert airflow baffle 112
reinsert riser card 98
remove airflow baffle 103
remove cable management arms 120
remove CPUs 105
remove enclosure from rack 122
remove front panel and light pipe
assembly 118
remove heat sinks 104
remove inner rails from server module 85
remove memory cards 103
remove outer enclosure rails from
rack 122-123
remove outer server module rails from
rack 85
remove riser card from server module 89
remove server module cover 88
remove server module from rack 83
remove SSDs 99
remove upgrade-kit drives 115
requirements 60
reset BIOS on server modules 77
shut down 80
single enclosure 1
uncable enclosures 81
unpack enclosures 62
unpack server modules 68
132
Index
HCP S Series Node Refurbishment