How to fix Hitachi CP-WU13K Projector if it won't turn on?
If your Hitachi Projector won't turn on, there are a few things to check. First, make sure the projector is plugged securely into a working wall outlet. Also, ensure that the lens cover has been properly replaced. A faulty AC socket can also prevent the projector from turning on, so verify that the socket is functioning correctly.
What to do if Hitachi CP-WU13K won't turn on after being turned off?
If you cannot turn on the Hitachi Projector two minutes after you have just turned it off, wait for the projector to cool down completely before starting it up again.
How to brighten a dim picture on Hitachi CP-WU13K?
If the picture on your Hitachi Projector looks dim, try adjusting the image brightness, contrast, color, and tint. It's also possible that the projector lamp is nearing the end of its life and needs replacement.
What to do if the Hitachi CP-WU13K image is blurry?
If the image on your Hitachi Projector is blurry, try adjusting the lens focus. If the blurriness occurs suddenly, it could be due to temperature or humidity changes causing condensation inside the projector. In this case, turn off the projector and wait for the moisture to evaporate.
How to fix a Hitachi Projector image that is too bright?
If the image from your Hitachi Projector is too bright or the bright areas are blurry, the contrast might be set too high. Try lowering the contrast settings.
Why is my Hitachi Projector remote control not working?
If the Hitachi Projector's remote control isn't working, start by replacing the batteries. Ensure you've inserted them with the correct orientation. If that doesn't help, try adjusting the distance and angle between the remote and the projector, as you might be too far away or at an extreme angle. Also, check for any obstacles between the remote and the projector or intense light sources near the IR sensor. If a wired remote cable is connected, press the ENTER button on the remote control followed by the Address button until the panel of the remote control flashes once.
Why does my Hitachi CP-WU13K show no picture but OSD Menu works?
If you can turn on your Hitachi Projector and access the OSD menu but see no picture, ensure the projector is turned on properly and that you've selected the correct input source. Also, check the connection between the projector and the input device to make sure they are correctly connected.
Why does the Hitachi CP-WU13K Projector image flash occasionally?
If the image on your Hitachi Projector flashes occasionally, ensure that the cables and the input device are properly connected and that the input device is in normal working order. If the issue persists, the projector lamp might be faulty and need replacement.
Why does my Hitachi CP-WU13K Projector image look washed out?
If the image on your Hitachi Projector appears washed out or the dark areas are too bright, the image brightness might be set too high. Try lowering the brightness settings.
What to do if Hitachi CP-WU13K Projector image is broken when connected to DVD player?
If you've connected your Hitachi Projector to a DVD player and the image appears broken or split, and the DVD player is connected through component cables (RGB-S or COMPONENT2), you might have set it to progressive scan. Try disabling the progressive scanning function on the DVD player.
General| Resolution | WUXGA (1920 x 1200) |
|---|---|
| Light Source | Lamp |
| Throw Ratio | 0.8 - 8.0:1 (depending on lens) |
| Display Type | 3LCD |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Brightness | 13, 000 lumens |
| Lens Shift | Vertical: ±60%, Horizontal: ±30% (depending on lens) |
| Projection Size | 600 inch |
| Input Connectors | HDMI, DVI-D, VGA, BNC, S-Video |
| Lamp Type | UHP |
Covers power, shock, overload, cleaning, and environmental hazards.
Covers ventilation, filter, foreign objects, carrying, and servicing.
Covers orientation, power, focus, zoom, and keystone correction.
Discusses throw distance, installation types, and device connections.
Detailed configuration of input sources and related options.
Detailed configuration of image parameters like contrast, brightness, etc.
Detailed configuration of zoom, PIP, and aspect ratio.
Detailed configuration for lamp modes and status.
Guide to resolving projector issues based on symptoms.
To Next Page
