59
the LED indicators
Warning
Flashes once in green and red: The lamp is approaching the Replacement Life Cycle. It should
be replaced with a new lamp.
Note; Replacement Life Cycle varies depending upon selected operation
mode, environmental conditions and usage.
Status Blue
(Standby)
Green
(Power)
Red
( Issue )
1. Standby
2. Lamp is approaching the Replacment Life Cycle
repeat repeat
3. Cooling / Warm up repeat
4. Power on / Normal
5. Lamp fail repeat
6. Lamp door open repeat
7. Fan fail repeat
8. Over Temperature repeat
9. System Error
Remark:
The time period of each step in the above LED blinking pattern is 500 milliseconds, e.g., for “Cooling / Warm up” state, the
green LED will ON for 500 milliseconds, and then OFF 500 milliseconds, and then repeat the above LED pattern.
To Next Page
Loading...
