60
Eftdsjqujpo Tqfdjgjdbujpot
Resolution 1920 × 1200 (Native)
Micro display 3 × DLP 0.96" DMD
Contrast 2000:1 (Typical)
Luminance uniformity
Lamp 2 × 465W UHB
Projection lens - projection ratio
FL-K01(0.67:1)
FL-K02(1.1:1)
SL-K03(1.4 - 1.9:1)
ML-K04(1.9 - 2.6:1)
LL-K05(2.6 - 4.2:1)
UL-K06(4.2 - 7.0:1)
Input/Output ports
1 × COMPONENT1
1 x Sync In
1 x Sync Out
2 × HDMI
1 x DVI (dual link)
1 × COMPONENT2
1 × 10/100 BASE-T
1 × RS-232
2 × 12V Trigger
1 × IR ext.
1 x SDI/HDSDI/3G
Primary voltage range
100V - 130V (±10%)
200V - 240V (±10%)
Standby power consumption
2W max power when RJ45 is disable ;
3W when RJ45 is enable
Maximum input resolution 1920 × 1200
Operating temperature
0~40°C
Note 1: The normal operating temperature of the DMD is
between 10~65°C
Note 2: The DMD may operate normally for approximately
10 minutes under 0~10°C short operation under such
temperature will not result in DMD damage.
Noise level under normal operation < 48 dBA
Noise level under Eco mode < 44 dBA
Weight 34 kg (Without PJ Lens, PD units)
To Next Page
Loading...
