6 - 1
Chapter 6 Communication Mode
For EH-SIO, after the initial setting is complete, the communication procedure is then decided. This
communication procedure is called the communication mode. EH-SIO has two communication ports which are
operated independently, therefore a different communication mode can be assigned to each communication port.
This chapter explains the details of each communication mode. Please create a communication program after
carefully reading this chapter and "Chapter 5 Control of EH-SIO."
6.1 Introduction
This paragraph explains the basic operation of EH-SIO. Please refer to the next paragraph for a detailed explanation of
the communication mode.
Basic operation of EH-SIO
Operation of EH-SIO is shown in the following figure.
Figure 6.1 Basic operation of EH-SIO
To Next Page
Loading...
